This was the first time I had seen a carbon fiber head that broke. It almost completely sheered off at the head. In this case the metal rod stopped just before the head. I think if the model had the rod turn up into the head, it most likely would not have broken.

1. Make a quick templet so I can cut the fiber to the correct shape. Then wrap it around the stick and the head.
2. Finish off the fiber so you don't see any seams.
3. Do a little final finishing of the piece.
4. Wrap it with clear thread to help reinforce the pressure at the tip..
5. Put the old hair back in.

IMG 20230404 094335 941	IMG 20230404 132801 810
IMG 20230412 162222 636	IMG 20230412 165033 337